The Wincom 80-2T Laboratory Centrifuge is a reliable, portable tabletop Wincom Laboratory Centrifuge 80-2t machine designed for low-speed routine sample separation. It is primarily used in schools, industrial labs, and hospitals for separating blood serum and plasma.
Key Specifications & Features
- Maximum Speed: Up to 4000 rpm, ideal for basic qualitative analysis of serum and plasma.
- Rotor Capacity: Configured with a 12-tube angled rotor holding 15ml tubes.
- Timer Range: Mechanical countdown tracking from [0 to 60 minutes]
- Display Interface: Equipped with an integrated digital display panel for precise, electronic parameter monitoring.
- Build Structure: Built as a compact, portable desktop unit optimized for steady benchtop performance with low noise levels.
Technical Parameters
- Relative Centrifugal Force (RCF): Reaches a maximum relative centrifugal force of 1,435 × g to 2,325 × g depending on the specific rotor configuration.
- Working Capacity: Accommodates 12 tubes with standard dimensions supporting up to 15ml–20ml liquids per tube.
- Power Parameters: Operates on a standard alternating current supply of 220V at 50Hz (with 110V at 60Hz configurations available for alternative regions).
- Stepped Regulation: Uses a digital step-speed control mechanism rather than smooth stepless knobs, ensuring consistent RPM selection across sample sets.
Operating Instructions
- Balance the Load: Always load tubes symmetrically in opposite pairs. Unequal weight distribution damages the drive shaft.
- Secure the Lid: Close and lock the mechanical lid completely before starting to prevent hazardous friction or aerosols.
- Set Parameters: Use the integrated front touch/push panel to specify the desired process duration and target RPM.
- Deceleration Safety: Allow the internal motor rotor to come to a complete physical stop on its own. Never apply manual pressure to the rotor to slow it down.
Operational Environment Requirements
- Surface Layout: Must be placed on a rigid, completely level table or benchtop to minimize vibration.
- Safety Buffer Area: Maintain a clear safety radius of at least 30 cm around the machine housing during high-speed rotation.
- Atmospheric Conditions: Keep the operating room clean, dry, and away from direct moisture or corrosive chemical fumes to prevent circuit breakdown.
Reviews
There are no reviews yet.