Refrigerated High Speed Micro Centrifuge D1524R DLAB USA

৳ 380,000.00

In stock

Max. Speed 200-15,000rpm
Temp Sett: -20℃- 40℃
Model: D1524R
Brand: DLAB
Country: USA

Category: Brand:

Description

Key Features:

• Centrifuge chamber door with automatic adsorption door lock design, can be closed with a single finger.

• Precooling, the compressor will automatically start cooling as long as the set temperature is lower than the ambient temperature.

• Sound indicator to prompt that the upper cover is closed to maintain the temperature inside the chamber, after centrifugation.

• Advanced R290 fluorine free refrigerant, low carbon and environmental protection.

• Maximum rotation speed can be achieved even at 4℃.

• Up to 9 program storage capacity according to experimental needs.

• Biosafety rotor, three-layer seal for biosafety

• High-strength aluminum alloy, three layered biosafety to withstand numerous high temperature and high pressure sterilizations.

• Five rotors with 0.2mL, 0.5mL, 1.5mL, 2mL and 5mL centrifuge tubes/ PCR tubes capacity.

• An external condensation tank prevents condensate within the centrifuge chamber.

Specification:

Model D1524R
Max. Speed 15,000rpm (200-15,000rpm) in 100rpm increments.
Max. RCF 21,380×g, step: 10×g
Capacity 1.5/2mL×24 (Can Choose 0.5mL×36, PCR8×4, 5mL×12, 5mL×18)
Temperature setting  -20℃- 40℃
Timing 30s-99 min; HOLD (continuous running)
Motor Type DC brushless motor
Safety Performance Dual door lock, over-speed detection, over-temperature detection with Internal diagnosis system.
Power Requirements Single phase, 200-240V, 50Hz, 500W
Dimensions(mm) 332(Width) × 553(depth) × 283(height)
Weight 30kg
Acceleration and deceleration time 25s↑25s↓
Noise ≤56dB
Other functions Rotation speed/RCF switchover, inching operation, running process indicator, sound alert. Acceleration/ deceleration in 9 steps, program storage capacity.

Reviews

There are no reviews yet.

Be the first to review “Refrigerated High Speed Micro Centrifuge D1524R DLAB USA”

Your email address will not be published. Required fields are marked *